IZONIL Quatro

Lightweight EPS roof and floor screed

Lightweight roof and floor screed mixed on site with EPS beads for above-ground concrete slabs.

selective source with thermal hold

Archived source issuer: RED LION COMPANY LTD., Vietnam stated as manufacturer. Printed edition: June 2018. This SEED-prepared summary is not an OEM reissue.

Product code: WDS-Q
Packaging: 22 kg powder bag plus 60 L EPS beads
Coverage / consumption: 22 kg powder plus 60 L EPS beads covers approximately 1 m² at 50 mm

View inquiry Technical documents

IZONIL Quatro — Product imagery from the supplied manufacturer literature. Confirm current packaging with our team.

Material overview

Lightweight roof and floor screed mixed on site with EPS beads for above-ground concrete slabs. Technical details are attributed to the archived IZONIL source June 2018. Confirm the current matching manufacturer documentation and project suitability before use.

Applications

Above-ground concrete roof slabs
Above-ground concrete floor slabs

Reviewed technical data

Recorded source values with stated conditions. This review does not establish a current product release or approval.

Packaging and additional material: 22 kg powder bag plus 60 L EPS beadsizonil quatro tds; June 2018 pp. 1
Water addition: 11–12 L per 22 kg powder and 60 L EPS beadsizonil quatro tds; June 2018 pp. 1, 2
Layer thickness: 50–60 mm; minimum recommended application 50 mmizonil quatro tds; June 2018 pp. 2
Coverage: 22 kg powder plus 60 L EPS beads covers approximately 1 m² at 50 mmizonil quatro tds; June 2018 pp. 2
Hardened bulk density: 500 ± 50 kg/m³izonil quatro tds; June 2018 pp. 2
Compressive strength: At least 1.1 N/mm²; age not specified in this rowizonil quatro tds; June 2018 pp. 2
Workable life: At least three hours at 20 °Cizonil quatro tds; June 2018 pp. 1, 2
Storage: The archived sheet lists a minimum 18-month shelf life. Confirm current storage conditions and the supplied powder/EPS combination.

Application & safety

Method of application

Use sound above-ground concrete slabs free of contamination and loose material. Pre-wet and remove excess water. Resolve penetrations, parapet junctions and drainage details as a complete specified system before laying screed. The source describes gravity-mixing powder into water, then adding the specified EPS beads. Lay a minimum 50 mm layer and form the required drainage slope. Protect against rapid drying for at least five days and rain for at least 24 hours at 20 °C. Allow at least three weeks before finishing. Confirm the complete roof build-up and finish with the technical team.

Safety notes

Consult the current product safety data sheet and follow its handling measures before use. The archived technical sheet is not a substitute for an SDS.

For project selection and substrate-specific advice, contact technical support.

Review limits

Do not describe this material as the TENSYL two-component Quatro Coating.
Do not state EPS-bead conductivity as the conductivity of the finished screed.
Do not extend the above-ground slab scope to underground tanks or walls.

The thermal-conductivity entry belongs to EPS beads, not the finished screed. No finished-screed conductivity is established.
Water-penetration figures conflict. Hold that rating; do not infer service-life, crack-free or comparative-weight guarantees.

Confirm the exact supplied product, substrate, exposure and current TDS/SDS with technical support.