TENSYL Quatro Coating

Two-component cementitious coating

Two-component cementitious coating for specified waterproofing applications.

Data completion / technical review hold

SEED-prepared review of identity records and available technical evidence. Confirmed packaging is not a formulation release.

Product code: CC 101
Packaging: Part A 5 L; Part B 22 kg. Current technical release pending.
Coverage / consumption: Confirm consumption and application requirements for the selected product and system.

View inquiry Technical documents

TENSYL Quatro Coating — Part B preview · 22 kg to verify — Illustrative Part B packaging design preview, not a complete supplied kit. Printed 22 kg remains subject to verification; confirm the matched Part A and Part B supply.

Material overview

Two-component cementitious coating for specified waterproofing applications. Selection and application require the current product-specific technical and safety documentation.

Applications

Wet areas; confirm suitability for the specified system.
Below-tile waterproofing; confirm suitability for the specified system.
Inverted-roof waterproofing; confirm suitability for the specified system.

Reviewed technical data

Recorded source values with stated conditions. This review does not establish a current product release or approval.

System identity: Separate from Roof Seal and IZONIL Quatro roof screedSEED Chemicals product confirmation record; 2026-09-27; Decided table item 5 | SEED Chemicals product confirmation record; 2026-09-27; Decided table item 6
Component formats: Part A liquid in plastic bottle; Part B powder in paper bagSEED Chemicals product confirmation record; 2026-09-27; Decided table item 5
Existing kit identity: Part A 5 L; Part B 22 kg. Current technical release pending.SEED Chemicals accepted packaging identity record; 2026-09-23; CC 101 rows | Historical product source: pdf-05; No current revision established; PDF page 1
Storage: Confirm the current product-specific shelf life and qualified storage conditions for the supplied batch.

Application & safety

Method of application

Use only the matched components. Mixing proportions, added water, thickness and curing are on technical hold; request the reconciled instructions before use.

Safety notes

Request the current product-specific Safety Data Sheet and handling guidance before storage, mixing or application.

For project selection and substrate-specific advice, contact technical support.

Review limits

Full-kit and partial-batch mixing instructions conflict. Added water, component proportions, thickness, yield and curing remain on hold.
Do not use a service-temperature range as an application range. No current potable-water approval is established. Request matched component SDSs.

Confirm the exact supplied product, substrate, exposure and current TDS/SDS with technical support.