IZONIL Skim Coat

White superfine skim coat for specified internal and external plastered and concrete wall surfaces. Technical details are attributed to the archived IZONIL source June 2018. Confirm the current matching manufacturer documentation and project suitability before use.

Reviewed technical data

Recorded source values with stated conditions. This review does not establish a current product release or approval.

Packaging

20 kg paper or plastic bagizonil skim coat tds; June 2018 pp. 2

Water addition

7.2–7.5 L per 20 kgizonil skim coat tds; June 2018 pp. 2

Total thickness

2–3 mm in two layersizonil skim coat tds; June 2018 pp. 2

Coverage

20 kg covers approximately 7–8 m² at 2–3 mmizonil skim coat tds; June 2018 pp. 2

Compressive strength

5–9 MPa at 28 daysizonil skim coat tds; June 2018 pp. 2

Workable life

At least three hours at 20 °Cizonil skim coat tds; June 2018 pp. 2

Layer interval

30–60 minutes under the source conditionsizonil skim coat tds; June 2018 pp. 2

Time before finishing

At least three daysizonil skim coat tds; June 2018 pp. 3

Storage

The archived sheet lists a minimum 18-month shelf life. Confirm current storage conditions and batch information with the supplier.

Method of application

Use sound, clean plastered or concrete walls. Patch holes deeper than 2–3 mm with suitable plaster and slightly wet the surface immediately before application. The source describes two 1–1.5 mm layers, total 2–3 mm. Apply the second when the first is partially dry, stated as 30–60 minutes. Sand only after at least 24 hours and remove sanding dust. Allow at least three days before finishing. Protect from rain for at least 24 hours at 20 °C and avoid direct sun, strong wind or rain during application. Use above +5 °C without expected freezing.

Safety notes

Consult the current product safety data sheet and follow its handling measures before use. The archived technical sheet is not a substitute for an SDS.

For project selection and substrate-specific advice, contact technical support.

• This wall-finishing sheet does not establish roof-deck or floor-slab waterproofing use.
• Do not claim a guaranteed service life or make an unsupported comparison with acrylic putty.

• The archived June 2018 sheet names RED LION COMPANY LTD., Vietnam. Current local manufacture or licensing is not verified by this review.
• No guaranteed service life or comparison with acrylic putty is established.

Confirm the exact supplied product, substrate, exposure and current TDS/SDS with technical support.