IZONIL Universal

Dry-mixed plaster for above-ground internal and external vertical brick and block walls. Technical details are attributed to the archived IZONIL source No printed revision date identified. Confirm the current matching manufacturer documentation and project suitability before use.

Reviewed technical data

Recorded source values with stated conditions. This review does not establish a current product release or approval.

Packaging

25 kg plastic bagizonil universal tds; No printed revision date identified pp. 1

Layer thickness

10–20 mmizonil universal tds; No printed revision date identified pp. 1

Water addition

4.0–4.7 L per 25 kgizonil universal tds; No printed revision date identified pp. 1, 2

Coverage

25 kg covers 2 m² at 10 mm or 1 m² at 20 mmizonil universal tds; No printed revision date identified pp. 1

Workable life

At least 180 minutes at 20 °Cizonil universal tds; No printed revision date identified pp. 1

Compressive strength

6–8 N/mm²; age is not specified in this rowizonil universal tds; No printed revision date identified pp. 1

Flexural strength

At least 1.6 N/mm² at 28 daysizonil universal tds; No printed revision date identified pp. 1

Adhesive strength

At least 0.3 N/mm²izonil universal tds; No printed revision date identified pp. 1

Vapour permeability coefficient

μ ≤ 12 in the technical tableizonil universal tds; No printed revision date identified pp. 1

Storage

The sheet lists a minimum 18-month shelf life. Confirm current storage conditions and supplied batch with the manufacturer; no complete storage-condition specification is established here.

Method of application

Use sound, clean above-ground brick or block walls, free of loose material and contamination. Thoroughly moisten immediately before application. Apply manually or by a suitable plastering pump within the stated thickness. The source describes embedding 5 × 5 mm, 145 g/m² mesh after about 70% of the thickness, then applying the remainder. Protect against rapid drying for at least 48 hours and rain for at least 24 hours at 20 °C. Allow at least three weeks before finishing; confirm a breathable finish. Detailed mixing sequence needs confirmation because local sheet versions differ.

Safety notes

Consult the current product safety data sheet and follow its handling measures before use. The archived technical sheet is not a substitute for an SDS.

For project selection and substrate-specific advice, contact technical support.

• Do not extend this sheet to underground walls, basements, tanks or horizontal slabs.
• Do not treat a non-toxic marketing statement as current potable-water approval.

• Above-ground vertical brick/block walls only; underground walls, tanks and horizontal slabs are outside the selected sheet.
• Detailed mixing sequence and finishing compatibility require clarification across source versions. Current potable-water approval is not established.

Confirm the exact supplied product, substrate, exposure and current TDS/SDS with technical support.