VELOSIT DB 830 is a surface-applied joint tape embedded between compatible bedding and overcoat layers. It forms part of positive-side waterproofing details at suitable joints and penetrations, with a maximum joint movement of 0.5 mm.
Product at a glance
Role
Embedded surface tape
Water side
Positive-side only
Movement limit
Maximum 0.5 mm
Manufacturer product-roll reference.DB 830 tape between embedding mortar and overcoat.Embedded tape at a specified wall-slab junction.
Uses and benefits
Joints and penetrations
Connects specified waterproofing details at suitable joints and penetrations within a compatible surface-waterproofing system.
Embedded within the coating build-up
The tape sits between the bedding and overcoat, forming part of the material-contact detail on the substrate.
Application notes
For positive-side water pressure only. Material elongation does not increase the maximum 0.5 mm joint-movement limit.
Joint geometry, terminations and compatibility with the substrate, pipes and adjacent materials remain part of the complete project-specific detail.
Product guide
Embedded surface joint tape
VELOSIT DB 830
VELOSIT DB 830 is a surface-applied joint tape embedded between compatible bedding and overcoat layers. It forms part of positive-side waterproofing details at suitable joints and penetrations, with a maximum joint movement of 0.5 mm.
Tape within the positive-side waterproofing detail
VELOSIT DB 830 is a surface-applied joint tape embedded between compatible bedding and overcoat layers. It forms part of positive-side waterproofing details at suitable joints and penetrations, with a maximum joint movement of 0.5 mm.
Tape contact within a waterproofing build-up
DB 830 tape between embedding mortar and overcoat.Open higher-resolution detail ↗Embedded tape at a specified wall-slab junction.
Uses and benefits
Joints and penetrations
Connects specified waterproofing details at suitable joints and penetrations within a compatible surface-waterproofing system.
Embedded within the coating build-up
The tape sits between the bedding and overcoat, forming part of the material-contact detail on the substrate.
Application notes
For positive-side water pressure only. Material elongation does not increase the maximum 0.5 mm joint-movement limit.
Joint geometry, terminations and compatibility with the substrate, pipes and adjacent materials remain part of the complete project-specific detail.
Project selection and technical detail
Tape within the positive-side waterproofing detail
A surface-applied tape embedded within a compatible waterproofing build-up at specified joints and penetrations. Use is limited to positive-side water pressure and joint movement up to 0.5 mm.
Embedded surface joint tape
Conceptual tape detail; not a complete joint detail. Not to scale.
Product reference
Role
Embedded surface tape
Water side
Positive-side only
Movement limit
Maximum 0.5 mm
Confirm the supplied product and the complete project specification with SEED.
Where it fits
01
Connect a specified waterproofing detail
For suitable joints and penetrations using a selected compatible bedding and overcoat system.
Questions before specification
01
Check water side and movement
Confirm positive-side exposure and that the designed movement remains within the tape system’s stated limit.
02
Specify the complete interface
Select the compatible bedding and overcoat and confirm the surrounding joint, pipe or penetration detail.
Coordinate the complete system
01
Use the joint movement limit
Material elongation is not an allowable joint displacement. The selected detail must respect the maximum 0.5 mm movement limit.
02
Detail the actual assembly
Joint geometry, terminations and compatibility with the substrate, pipes and adjacent materials remain part of the complete project-specific detail.
Application guidance
Obtain the matched technical and safety sheets and complete project application instructions for the supplied VELOSIT DB 830 before work.